How to connect modem to computer for internet?

Most modems today connect the modem to a computer for the Internet using a USB connection or an Ethernet connection. For more details read the entire article written carefully.

Connect your modem

  • Before turning on your modem, you’ll want to connect it to your computer and your phone jack or cable outlet.
  • To connect it to your computer, plug one end of the Ethernet cable into the Ethernet or LAN port on the back of your modem, then plug the other end into the Ethernet port on the back of your computer.
  • Your modem should come with an Ethernet cable, but any old Ethernet cable will work.

Method to connect the modem to a computer for internet –

  • Check your cable modem and its accessories – Take the modem out of the box and determine if you actually have a cable modem. It should have a coaxial port or a small cylindrical protrusion located on its back. A DSL modem will not have that; Instead, DSL modems have telephone cable ports like the ones you find on telephones into which you can plug the telephone line coming from the wall. Accessories should include the following :
  1. An Internet cable to connect the modem to your computer.
  2. cable modem power adapter.
  3. A coaxial cable for connecting the modem to the cable line.
  • Voltage Rating of the Power Adapter – Before plugging the modem in, be sure to first read the voltage rating written on the power adapter to make sure it matches the voltage rating of the outlet you are going to plug it into. Doing so will help to avoid short circuits.
  • Power Up – Once you have taken the cable modem out of the box, take the power adapter and plug it into the modem’s power port (located along the area of ​​the coaxial cable). Take the other end of the power adapter, and plug it into a power outlet.
  • Connect the cable to the modem Use – Take the coaxial cable coming from your wall and connect it to the port on the back of the modem. Tighten it securely by screwing the cable into the port.
  • LAN, or Internet cable usage – Plug one end of the cable modem into the back. There’s only one port on the modem where the Internet cable can fit, so it’s a pretty easy find. Take the other end of the Internet cable, and plug it into the back of your computer (the same port with the modem).

Details of setting up your modem and network –

Once you have a tried-and-true Internet connection, it’s time to set up your modem and network.

First, go to your modem’s administration panel by typing the modem’s IP address in your URL bar. Common modem administrator IP addresses include the 192 .168.0.1 and 192.168.1.1 IP addresses. You’re usually the administrator IP address of each modem on the back of the modem.